Possible Issues - Tuğcan Metal Bursa
-
- The bandsaw tension may be insufficient.
-
- Take the leading arm closer to the work piece.
-
- Perform trials with a band with larger saw teeth.
-
- The feed rate may be too high.
-
- Feed rate may be too high.
-
- Bandsaw tension may be too high.
-
- The pulley diameters may be too small for the bandsaw in use.
-
- The stand may be performing cuts with.
-
- Cutting rate may be too high.
-
- Chosen teeth may be unsuitable.
-
- Band rotation speed may be wrong.
-
- The work piece may be moving during cutting.
-
- The cutting fluid may be failing to provide the necessary cooling and lubrication.
-
- The work piece may contain impurities or slag.
-
- The work piece may be moving due to the clamp not being able to hold the work piece well.
-
- The sawdust sweeping brush on the stand may be out of order or worn.
-
- The cutting fluid may be unsuitable.
-
- The stand may be subject to vibration.
-
- The leader may be worn or unsuitable.
-
- The work piece may not be fixed tightly enough.
-
- The stand may be in need of maintenance.
-
- The tooth selection may be wrong.
-
- The saw may have become blunt.
-
- Band tension may not be suitable.
-
- Band speed and feed rate may be unsuitable for the diameter of the work piece.
Web Tasarım & Hosting : yeşilbeyaz